标题:Performance of a cemented carbide self-lubricating tool embedded with MoS_2 solid lubricants in dry machining
作者:Song Wenlong;Dengjianxin;Zhang Hui;Yan Pei;Zhao Jun;Ai Xing
作者机构:[Wenlong, S] Department of Mechanical Engineering, Shandong University, Jinan 250061, Shandong Province, China, Shantui Construction Machinery Co., Lt 更多
通讯作者:Wenlong, S
来源:Journal of manufacturing processes
出版年:2011
卷:13
期:1
页码:8-15
DOI:10.1016/j.jmapro.2010.08.004
摘要:Four micro-holes were made using a micro-EDM on the rake and flank face of cemented carbide (WC/ TiC/Co) tools. Molybdenum disulfide (M0S2) solid lubricants were embedded into the four micro-holes to form self-lubricating tools (SLT-1 and SLT-2). Dry machining tests on hardened steel were carried out with an SLT-1 self-lubricating tool with four micro-holes embedded with MoS_2 solid lubricants in the rake face, an SLT-2 tool with four micro-holes embedded with MoS_2 in the flank face, an SLT-3 tool with four micro-holes embedded without M0S2 in the rake face, an SLT-4 tool with four micro-holes embedded without MoS_2 in the flank face and a conventional tool SLT-5. The cutting forces, tool wear, and average friction coefficient at the tool-chip interface were measured and compared. Finite Element Analysis (FEA) was used to analyze the effect of micro-holes on the mechanical properties of cutting tools. It was shown that the cutting performance of SLT-1 and SLT-2 self-lubricated tools were greatly improved compared with that of SLT-3, SLT-4, and SLT-5 tools. The SLT-1 self-lubricating tool possessed the lowest friction coefficient, while the SLT-2 self-lubricating tool resulted in a lower flank wear. It is indicated that cemented carbides embedded with M0S2 solid lubricants in the wear face is an effective way to reduce the rake and flank wear of conventional tools.
收录类别:EI;SCOPUS
Scopus被引频次:10
资源类型:期刊论文
原文链接:https://www.scopus.com/inward/record.uri?eid=2-s2.0-78651323922&doi=10.1016%2fj.jmapro.2010.08.004&partnerID=40&md5=f916a759dc941199f9c4c00b6e909acb
TOP