标题:A modified normal contact stiffness model considering effect of surface topography
作者:Zhao, Bin;Zhang, Song;Man, Jia;Zhang, Qing;Chen, Yan
作者机构:[Zhao, B] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, 17923 Jingshi Roa 更多
通讯作者:Zhang, Song
通讯作者地址:[Zhang, S]Shandong Univ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ, Sch Mech Engn, 17923 Jingshi Rd, Jinan 250061, Peoples R China 更多
来源:Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology
出版年:2015
卷:229
期:6
页码:677-688
DOI:10.1177/1350650114558099
关键词:Joint surface;normal stiffness;shoulder-shoulder contact;elastic-plastic contact;surface topography
摘要:The contact stiffness of joint surfaces is an important factor influencing the static and dynamic characteristics of the mechanical equipment. In the present research, a modified normal contact stiffness model of two rough surfaces is proposed. First, the stiffness model of a single asperity contact pair is obtained based on shoulder-shoulder contact in conjunction with the elastic-plastic contact model proposed by Jackson and Green. Second, the topographies of contact surfaces are analyzed, and the locations of asperities and the statistical distributions of asperity heights and radii are acquired experimentally. The asperities are then generated using Monte Carlo method with the information to simulate the real contact. Finally, the asperities contact state is determined and if the contact occurs, the stiffness of the single asperity pair is calculated and summed as the total normal stiffness of two contact surfaces. The proposed stiffness model is validated by experiments with the errors less than 10%.
收录类别:EI;SCOPUS;SCIE
WOS核心被引频次:2
Scopus被引频次:6
资源类型:期刊论文
原文链接:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84930396244&doi=10.1177%2f1350650114558099&partnerID=40&md5=de0f6adeecec1c9a085acb51fb71d93c
TOP