按条件检索“50”条记录

已选条件: 出版年: 2011 × 机构: 机械工程学院 × 文献类型: conferencearticleca ×
导出
  • 排序
  • 显示
1. Performance research of increasing-friction herringbone driving roller based on finite element analysis EI

作者:Sui, Xiu-Hua ;Wang, Shao-Bo ;Miao, De-Jun

作者机构:[Sui, Xiu-Hua ;Wang, Shao-Bo ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China;[Miao, De-Jun ] Key Laboratory of Mine Hazard Prevention and Control of China Ministry of Education, Shandong University of Science and Technology, Qingdao, China

会议名称:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011

会议日期:July 15, 2011 - July 17, 2011

来源:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings,2011511-513

资源类型:会议论文

2. Lightweight design for hydraulic support EI

作者:Zhang, Xin ;Zhang, Jianwu ;Zeng, Qingliang ;Wang, Chenglong

作者机构:[Zhang, Xin ;Zhang, Jianwu ] School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China;[Zhang, Xin ;Zeng, Qingliang ;Wang, Chenglong ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266510, China

来源:Key Engineering Materials,2011,Vol.450,79-82

资源类型:会议论文

3. Real-time identification of material parameters for quadrangle parts intelligent bending EI

作者:Su, Chunjian ;Li, Quanlan ;Guo, Sumin ;Zhang, Guangheng ;Ma, Rui

作者机构:[Su, Chunjian ;Li, Quanlan ;Guo, Sumin ;Zhang, Guangheng ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266510, China;[Ma, Rui ] College of Mechanical Engineering, Yan Shan University, Qinhuangdao 066004, China

来源:Proceedings of the 30th Chinese Control Conference, CCC 2011,20112653-2656

资源类型:会议论文

4. Simulation analyzing and optimization of manuplator base on ADAMS: Optimization of clamping manipulator EI

作者:Yuhui, Wang ;Chuanyi, Lv

作者机构:[Yuhui, Wang ;Chuanyi, Lv ] Mechanical Engineering College, Shandong University of Science and Technology, Shandong zibo, China

来源:2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings,20114397-4399

资源类型:会议论文

5. Evaluation of intelligent algorithms for Multidisciplinary Design Optimization EI

作者:Gao, Li ;Ye, Tieli ;Yu, Yongjin

作者机构:[Gao, Li ;Ye, Tieli ;Yu, Yongjin ] Shandong University of Science and Technology, College of Mechanical and Electronic Engineering, Qingdao, China

会议名称:2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011

会议日期:August 12, 2011 - August 14, 2011

来源:Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011,2011,Vol.6,2924-2927

资源类型:会议论文

6. New vertical type reducer with small teeth difference EI

作者:Yang, Zhenyu ;Fan, Zhenhe

作者机构:[Yang, Zhenyu ] School of Mechanical Engineering, Shandong University of Technology, Zibo, China;[Fan, Zhenhe ] Department of Mechanical Manufacturing, Shandong Chemical Engineering College, Zibo, China

会议名称:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011

会议日期:July 15, 2011 - July 17, 2011

来源:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings,2011453-455

资源类型:会议论文

7. Research on preparation of Ca3-xLa xCo4O9thermoelectric material by microwave heating EI

作者:Mu, Jiechen ;Zhang, Lipeng

作者机构:[Mu, Jiechen ] School of Mechanical Engineering, Shandong University of Technology, SDUT, Zibo, China;[Zhang, Lipeng ] School of Chemical Engineering, Shandong University of Technology, SDUT, Zibo, China

来源:2011 International Conference on Remote Sensing, Environment and Transportation Engineering, RSETE 2011 - Proceedings,20117064-7067

资源类型:会议论文

8. Simulation of liquid level maintain device of explosion-suppression water bag for mine EI

作者:Song, Zhi-An ;Chai, Jian-Ping

作者机构:[Song, Zhi-An ;Chai, Jian-Ping ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, QingDao, China

会议名称:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011

会议日期:July 15, 2011 - July 17, 2011

来源:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings,20115221-5223

资源类型:会议论文

9. Driving manner and design method on elbow joint of a artificial limb EI

作者:Gaozuo, Sun ;Binghui, Fan ;Chengzhi, Yuan ;Baojun, Liu ;Feng, Min

作者机构:[Gaozuo, Sun ] College of Mechanical and Electronic Engineering, Shandong Key Laboratory of Robotics and Intelligent Technology, Shandong University of Science and Technology, Qingdao, China;[Binghui, Fan ;Chengzhi, Yuan ;Baojun, Liu ;Feng, Min ] Shandong Key Laboratory of Robotics and Intelligent Technology, Research Center of Robotics, Shandong University of Science and Technology, Qingdao, China

来源:2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings,2011293-296

资源类型:会议论文

10. Partial rescheduling for permutation flow-shop scheduling subject to a machine breakdown EI

作者:Wang, Bing ;Wang, Xiaoming

作者机构:[Wang, Bing ] School of Mechatronics Engineering and Automation, Shanghai University, Shanghai, China;[Wang, Xiaoming ] School of Mechanical, Electrical and Information Engineering, Shandong University at Weihai, Weihai, China

来源:ASCC 2011 - 8th Asian Control Conference - Final Program and Proceedings,20111042-1047

资源类型:会议论文

11. Comparative experimental investigation on gas adsorption and desorption characteristics of benzene on macroporous resin and activated carbon fiber EI

作者:Wang, Jianwei ;Yang, Qianming ;Xu, Lin ;Yang, Jian

作者机构:[Wang, Jianwei ;Yang, Qianming ;Xu, Lin ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China;[Yang, Jian ] Key Lab of Low-carbon Energy and Energy-saving, Research Institute of Tsinghua University in Shenzhen, Shenzhen, China

来源:2011 International Conference on Remote Sensing, Environment and Transportation Engineering, RSETE 2011 - Proceedings,20114868-4870

资源类型:会议论文

12. A fully configurable monitoring system architecture based on embedded web server using AJAX-CGI EI

作者:Shi, Daguang ;An, Baixiu ;Cao, Jinglong ;Xu, Jia

作者机构:[Shi, Daguang ;An, Baixiu ;Cao, Jinglong ;Xu, Jia ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, China

来源:Proceedings - 2011 IEEE International Conference on Computer Science and Automation Engineering, CSAE 2011,2011,Vol.3,157-161

资源类型:会议论文

13. Influences of sintering process on the microstructure and mechanical behavior of ZrO2 nano-composite ceramic tool and die material EI

作者:Yi, Mingdong ;Xu, Chonghai ;Zhang, Jingjie ;Jiang, Zhenyu

作者机构:[Yi, Mingdong ] School of Material Science and Engineering, Shandong Institute of Light Industry, Jinan 250353, China;[Xu, Chonghai ] School of Mechanical Engineering, Shandong University, Jinan 250061, China;[Xu, Chonghai ;Zhang, Jingjie ;Jiang, Zhenyu ] School of Mechanical Engineering, Shandong Institute of Light Industry, Jinan 250353, China

会议名称:2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010

会议日期:November 6, 2010 - November 8, 2010

来源:Advanced Materials Research,2011,Vol.154-155,1356-1360

资源类型:会议论文

14. Study on effects of drying conditions on thin-layer drying of maize EI

作者:Wang, Shijun ;Shi, Xuejun

作者机构:[Wang, Shijun ] School of Mechanical Engineering, Shandong University of Technology, Zibo, China;[Shi, Xuejun ] School of Agricultural and Food Engineering, Shandong University of Technology, Zibo, China

来源:ICAE 2011 Proceedings: 2011 International Conference on New Technology of Agricultural Engineering,2011681-683

资源类型:会议论文

15. Cutting performance of cemented carbide-based self-lubricating tool embedded with CaF2 solid lubricants EI

作者:Song, Wenlong ;Zhang, Liyin ;Xu, Changzhong ;Li, Xuanqiu ;Yan, Jianfeng ;Deng, Jianxin ;Zhang, Liang

作者机构:[Song, Wenlong ;Zhang, Liyin ;Xu, Changzhong ;Li, Xuanqiu ;Yan, Jianfeng ;Zhang, Liang ] Shantui Construction Machinery Co., Ltd., Jining 272073, China;[Deng, Jianxin ] Department of Mechanical Engineering, Shandong University, Jinan 250061, China

会议名称:2011 International Conference on Advanced Engineering Materials and Technology, AEMT 2011

会议日期:July 29, 2011 - July 31, 2011

来源:Advanced Materials Research,2011,Vol.291-294,3083-3087

资源类型:会议论文

16. Design and evolution of variable topology parallel mechanisms EI

作者:Li, Tiecheng ;Cui, Rongjiang

作者机构:[Li, Tiecheng ] School of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou, China;[Cui, Rongjiang ] School of Mechanical Engineering, Shandong University of Technology, Zibo, China

会议名称:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011

会议日期:July 15, 2011 - July 17, 2011

来源:2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings,2011159-161

资源类型:会议论文

17. Performance analysis of CO2 capture system by MEA method based on solar assisted heat pump technology EI

作者:Yang, Qian Ming ;Luo, Yong Guo

作者机构:[Yang, Qian Ming ;Luo, Yong Guo ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, No.579, Qianwangang Road, Qingdao, Shandong, 266510, China

会议名称:2011 International Conference on Chemical Engineering and Advanced Materials, CEAM 2011

会议日期:May 28, 2011 - May 30, 2011

来源:Advanced Materials Research,2011,Vol.236-238,518-522

资源类型:会议论文

18. Design of space vector PWM controller based on artificial neural network EI

作者:Ji, Hua ;Li, Zhiyong

作者机构:[Ji, Hua ] Department of Electrical and Electronic Engineering, Shandong University of Technology, Zibo, Shandong, China;[Li, Zhiyong ] Department of Mechanical Engineering, Shandong University of Technology, Zibo, Shandong, China

会议名称:2011 2nd ETP/IITA Conference on Telecommunication and Information, TEIN 2011

会议日期:April 3, 2011 - April 4, 2011

来源:TEIN 2011 - 2011 2nd ETP/IITA Conference on Telecommunication and Information,2011,Vol.2,149-152

资源类型:会议论文

19. Multi-objective optimization design for cutting head of roadheader EI

作者:Zhang, Xin ;Liu, Xiaozhe ;Zhang, Jianwu ;Zeng, Qingliang

作者机构:[Zhang, Xin ;Zhang, Jianwu ] School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China;[Zhang, Xin ;Liu, Xiaozhe ;Zeng, Qingliang ] College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266510, China

来源:Key Engineering Materials,2011,Vol.450,75-78

资源类型:会议论文

20. Study on in-Situ preparation and growth mechanism of TiCxN 1-x whiskers EI

作者:Chong, Xue Wen ;Huang, Chuan Zhen ;Xu, Liang ;Zou, Bin ;Liu, Han Lian ;Zhu, Hong Tao

作者机构:[Chong, Xue Wen ;Huang, Chuan Zhen ;Xu, Liang ;Zou, Bin ;Liu, Han Lian ;Zhu, Hong Tao ] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, No. 197201, Jingshi Road, Jinan, Shandong, 250061, China;[Chong, Xue Wen ;Huang, Chuan Zhen ;Xu, Liang ;Zou, Bin ;Liu, Han Lian ;Zhu, Hong Tao ] Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, China

会议名称:2nd International Conference on Manufacturing Science and Engineering, ICMSE 2011

会议日期:April 9, 2011 - April 11, 2011

来源:Advanced Materials Research,2011,Vol.197-198,617-622

资源类型:会议论文

共 3 页, 50 条记录

TOP